FTTH Sc/APC Fast Connector Sc Fiber Optic Mechanical Connector
Fiber Optic Mechanical Connector designed for FTTH is a new generation of fiber connector used in assembly. It can provide Open flow and Precast
type of products, whose optical and mechanical specification meets the standard optical fiber connector. it is designed for high quality and high
efficiency for installation. the structure of crimping position is a unique design, and need not gluing, polishing neither any consumables.
Adapted fiber pre-installed structure, and convenient for field installation.
Application
· Connections at the desk for LAN environments
· Optical access network
· Fiber to the Subscriber (FTTX) applications
· Patch panels
· Direct equipment termination
Feature
· Factory-installed fiber stub
· No epoxy or polishing required
· Quick and easy fiber termination in the field
· Eliminates cable excess length and pigtail splice storage
· Cost effective
Technical specification
| Item | Parameter |
| Cable Scope | 3.0 x 2.0 mm &2.0*1.6mm Drop Cable |
| Size | 51*9*7.55mm |
| Fiber Diameter | 125μm ( 652 & 657 ) |
| Coating Diameter | 250μm |
| Mode | SM SC/APC SC/UPC |
| Operation Time | about 15s(exclude fiber presetting) |
| Insertion Loss | ≤ 0.5dB(1310nm & 1550nm) |
| Return Loss | SC/APC≤ 55dB SC/UPC ≤ 50dB |
| Success Rate | >98% |
| Reusable Times | >10 times |
| Tighten Strength of Naked Fiber | >5 N |
| Tensile Strength | >50 N |
| Temperature | -40 ~ +85 C |
| On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB |
| Mechanical Durability(500 times) | IL ≤ 0.3dB |
| Drop Test(4m concrete floor, once each direction, three times total) | IL ≤ 0.3dB |
